Veria Control Digital Timer T45 Programmable Thermostat

Enhance your underfloor heating experience with the Veria Control Digital Timer T45 Programmable Thermostat. This innovative digital timer-controlled device allows for precise temperature regulation by utilising floor temperature, room air temperature, or a combination of both. With its versatile 5+2 day programming mode, the thermostat caters to your specific lifestyle needs, dividing each day into four customizable time zones to ensure optimal comfort at all times. Not only does this smart programming help create the perfect environment, but it also promotes energy efficiency, ultimately reducing costs. Featuring an IP30 rating, an easy-to-read LCD display, and the advanced Veria Logic Sensor for consistent performance, along with both floor and room sensors, the Veria Control T45 is an essential addition for anyone seeking a comfortable and economical heating solution. Important Note: The thermostat must be installed by a qualified electrician. Installation and connection: Before installing the thermostat on the wall in the mounting box, open the front panel of the thermostat by gently pressing the latches located at the bottom of the thermostat. Connect the wires according to the diagram (see below) and fix the thermostat in the socket with screws. Check that all connections are correct and reinstall the front. Specifics: Max. load 13A - 2,990W at 230V. Operation voltage 180-240 V, 50 Hz. Precision +/-1°C. Sealant rating: IP30. Sensor type: NTC. Standby consumption: <2W. Temperature range 5-45°C. Element: IP Class 30. Temperature - floor [°C] [Max] 35°C. Temperature - floor [°C] [Min] 5°C. Temperature - room [°C] [Max] 45°C. Temperature - room [°C] [Min] 5°C. Height [mm] 86mm. Width [mm] 86mm. Box Contains: 1 x Veria Control Digital Timer T45 Programmable Thermostat.