StoneCare4U Essential Colour Boost Sandstone Sealer 5L

Transform your sandstone with StoneCare4U Essential Sandstone Sealer Colour Boost. This high-performance sealer creates a long-lasting, stain-resistant shield, subtly enhancing the stone's natural beauty. Ideal for sandstone, it also works wonders on porous limestone and slate. Its powerful, eco-friendly formula delivers superior stain protection while deepening and enriching natural colours, both indoors and out. This impregnating sealer penetrates deep to protect against staining and heavy soiling, revealing vibrant hues. For best results, ensure the surface is clean, dry (allow 72 hours in favourable, dry weather), and the application temperature is between 15°C and 23°C. Apply two coats using a low-pressure sprayer, roller, natural fibre brush, or sponge, allowing 45-60 minutes between coats. Don't dilute! Remove excess sealer within 20-30 minutes of application. Keep the surface dry during the 72-hour curing process to avoid unsightly white patches. Note: This sealer will alter the stone's colour. Test in an inconspicuous area first, and protect unsealed surfaces with masking material. Not suitable for Kandla Grey (mid and light grey) sandstone or non-porous surfaces. Clean sealed areas with a mild, pH-neutral cleaner or a very mild concentration outdoor cleaner. Avoid harsh or abrasive cleaning agents. Coverage: 4-6 sq metres per litre (depending on porosity). Available in 5L. Always wear appropriate safety gear: gloves, eye protection, face mask, and clothing.