StoneCare4U Essential Brick Waterproofer 5L 3 Pack

Extend the lifespan of your brickwork and conquer moisture with StoneCare4U Essential Brick Waterproofer. This high-performance, deep-penetrating masonry cream delivers exceptional water repellency, creating a robust barrier against damp penetration for up to 20 years—far surpassing the effectiveness of standard paints and coatings. Suitable for brick, stone, and most unprotected masonry, it preserves the original dry appearance of the substrate while providing long-lasting protection. The formula works by filling porous voids without blocking them, allowing the surface to breathe and release trapped moisture. This easy-to-apply cream also contributes to energy savings through improved thermal efficiency, a significant benefit for older properties prone to costly damp issues. Prevent penetrating dampness effortlessly on unpainted surfaces. It offers protection from flooding. For application, ensure the surface is clean and dry. Remove loose debris and wear appropriate safety gear (gloves, eyewear, mask, clothing). A minimum temperature of 10°C is required. A small test application in an inconspicuous area is recommended before full application to check suitability. Application methods include low-pressure sprayers, rollers, or natural fibre brushes. Apply generously, one coat usually suffices, though porous substrates may need a second. Do not dilute. Drying time is typically 30-90 minutes, but avoid application if rain is forecast within 24 hours. Note: While colourless when cured, slight darkening may occur on some substrates—always test first. Protect unsealed surfaces with masking material. Coverage: 5-10m² per litre per coat, depending on surface texture and porosity. Size: 5L. Pack of three.