- Prevents water penetration and spread of dampness on brick surfaces
- Increases thermal efficiency of the property
- Easy-to-apply formula
Extend the lifespan of your brickwork and conquer moisture with StoneCare4U Essential Brick Waterproofer. This high-performance, deep-penetrating masonry cream delivers exceptional water repellency and creates a robust barrier against damp penetration for up to 20 years—significantly outlasting standard paints and coatings. Suitable for brick, stone, and most unprotected masonry, it maintains the substrate's original dry appearance while providing long-lasting protection. The formula fills porous voids without blocking them, allowing the surface to breathe and release trapped moisture. This easy-to-apply solution also offers energy savings through improved thermal efficiency, particularly beneficial for older properties prone to costly dampness. Prevent penetrating dampness on unpainted surfaces effortlessly. Application Instructions:** Before application, remove loose debris and wear appropriate safety gear (gloves, eyewear, mask, clothing). Minimum application temperature: 10°C. Test in an inconspicuous area first to check suitability. Ensure the surface is clean and dry. Apply generously using a low-pressure sprayer, roller, or natural fibre brush. One coat usually suffices, though porous substrates may require a second. Do not dilute. Drying time: 30-90 minutes. Avoid application if rain is forecast within 24 hours. Note: The waterproofer is colourless when cured, but slight darkening may occur on some substrates—always test first. Protect unsealed areas with masking material. Coverage: 5-10m² per litre per coat. Size: 2 x 5L packs. Contains synthetic resins.
Brand:
StoneCare4U
Capacity:
10L
Type:
Masonry Sealants
Coverage:
Dependent on surface texture and porosity, you can expect coverage of 5–10m² per litre per coat.
Pack Qty:
2
Size:
46 x 23 x 21cm
Customer Assembly Required:
No
Height:
21cm
Material:
Non-Solvent Liquid
Width:
23cm
Depth:
46cm
Model No:
SC4U_ERS_BW2X5