Paving Slabs

Frequently Asked Questions

How do you lay paving slabs?

Laying paving slabs can be a tricky task to get right, so sometimes getting a professional in is the best answer. However, if you fancy a DIY project, check out our guide for how to lay a patio.

How do you cut paving slabs?

If you need to, you can cut paving slabs using a hammer and a chisel. However, it's best to either leave this to a professional or ensure you buy paving slabs of the correct size.

Can you paint paving slabs?

Yes, you can paint paving slabs using masonry or garden paint. Always remember to clean the slabs before you start painting.

How do you clean paving slabs?

The easiest and most effective way to clean paving slabs is using a pressure washer. The pressure of the water will remove even the most stubborn dirt and debris, leaving your patio slabs sparkling clean. For smaller areas, you can use warm, soapy water and a brush.

How do you grout paving slabs?

Grout is what you put between paving slabs to stop weeds growing in between them and prevent the slabs from moving. You can grout paving slabs using a pointing mortar made from building sand and cement.

Again, if don’t feel confident, it's best to leave this job to a professional. However, if you can handle some DIY, get some more guidance in our blog on how to lay a patio.

How many paving slabs do I need?

How many paving slabs you need will depend on the size of the area you wish to pave. Check out our guide for how to lay a patio for some expert guidance on measuring your patio slabs.

How do you cover old paving slabs?

There are numerous ways to cover old paving slabs without the hassle, and cost, of having them taken up and replaced. You can use garden paint to freshen up your patio slabs, or decorate them with beds or trough planters of plants and flowers. Explore our Garden and Outdoor hub for more outdoor inspiration.

Can you glue loose paving slabs?

No, we don't recommend using glue to fix loose paving slabs as it likely won't be strong enough to hold them in place. The best thing to use is mortar, in the same way as when you first laid the tiles. Visit our guide to how to lay a patio for more detailed instructions.