Peel Stop is a clear, flexible bridging sealer for surfaces where peeling, flaking, dusting or chalking is a problem. Use indoors or out to form a breathable membrane over questionable or faulty substrates. Peel Stop tightly bonds to old paint and problem areas forming a sound surface for new paint. Peel Stop forms a tough acrylic film that stays flexible and helps prevent peeling by letting moisture escape. A clear sealer, Peel Stop works like nothing else to stop peeling problems on old or new surfaces. Peel Stop prevents peeling, blistering, checking, cracking and flaking on wood siding and trim, yellow pine, rough sawn cedar, textured plywood, chalking or powdering, concrete and concrete block, stucco and galvanized gutters. Application - Shake or stir well before using. Do not thin. Apply with brush and/or roller or airless sprayer. Back brush or roll to work Peel Stop into cracks and edges of old paint. Proper application of Peel Stop will dry to a slight sheen. Apply a second coat if dull spots appear. Tinting is not recommended. Coverage - Typically 7.4 to 9.8m2 per 1L. Spread rate will vary according to the porosity of the surface and method of application. Drying Times - At normal temperatures Peel Stop will dry in one hour and may be primed or painted in two hours.