Rated 4.3 out of 5 by 3
Rated 4 out of 5 by optimal Good value mirror
Although this product has two pre-drilled holes, the recommended fixings advised on the pack are for mirror holder clips, rather than the alternatively available two screws with chrome caps. The recommended method leaves the pre-drilled holes unused and would look rather ugly. I used the screws and chrome cap pack - although this did intially leave the mirror a bit wobley as it stands a couple of mm proud of the wall. I solved this by putting small 1 cm square self adhesive foam pads on the back of the mirror at each corner. These were cut from some leftover self adhesive draught excluder strip - but any thin compliant material would do. Just be careful not to overtighten the two screws as you could damage or crack the mirror.
05 August 2013
Rated 5 out of 5 by radcliffe DIY Excellent Value for Money
This rectangular drilled mirror is one of the few drilled mirrors available in the marketplace and is easy to fix using chrome dome headed screws. The two drilled holes in the mirror provide a really good fixing system. Great value for money & easy to fix.
04 April 2012
Rated 4 out of 5 by Mirrorboy Good value mirror
Good value, clean, light mirror. Its a shame you have to buy the screws separately, and when you use them there are two holes in the mirror itself that aren't used - I would recommend not buying the screw set and using your own screws with the holes drilled into the mirror. Can't go wrong for a simple mirror.
04 February 2012