Product details

Fits any of our 2 tap hole basins.
  • Colour: Silver
  • Material: Solid vrass
  • Effects and finish: Chrome plated, Chrome
  • Features: Spout projection - Flow straightener Max. pressure - 16bar Min. pressure - 0.1bar Flow rate - 22.24L/min Pipe inlet size - 1/2-14BSP
  • Dimensions of basin tap: (H)74.2, (W)36.2mm
  • Dimensions: (H)105.3, (W)70, (D)159.5mm
  • Weight: 1074g
  • Working pressure: Low pressure - 0.1 bar required.

Eton Basin Taps - Chrome - 2 Pack 360126

GBP £34.99
70 points
Select Product Options

Eton Basin Taps - Chrome - 2 Pack

Free Collection in store.
Free Collection in store.
Home delivery within 3 days
Home delivery within 3 days
Express delivery also available
Check stock in your area Check stock in your area

{"calculators": { "calculator": { "pimProductAttr": ["", "", "", ""], "calcType": "" } } }

Rated 3.9 out of 5 by 14 reviewers.
Rated 4 out of 5 by traditional purchased this style to go with our traditional basin and refurbishment, look great if a little on the small side for my two hole basin! I may consider changing these before the install, wise to check this detail before selecting 25 April 2016
Rated 1 out of 5 by Dripping, expected better. Purchased these along with the matching bath shower mixer. I fitted these to the hand basin first. Once fitted and turned the water on the hot tap was dripping. Even when tightened right up it was still dripping. New taps shouldn't be like this. I returned these and the bath taps for a full refund, the staff were helpful and had no problems giving me the refund (in gift card form). I've now purchased some elsewhere manufactured by Swirl that look very similar. The other retailer is known for selling screws and other DIY things. They were better quality, had the spray bits in the ends of the tap, were cheaper and didn't leak. Overall, i'm in one way glad that they leaked because I have a better set of taps at less cost. I wouldn't recommend these taps. A couple of other bits of advice though that you really should do. 1. Fit proper back nuts made from brass. 1/2" for your basin, 3/4" for the bath. 2. Fit flexi's, make sure they're suitable for drinking water. 3. Fit inline isolation valves if you don't already have them and if they're not built-in to the flexi's. These three points are very important and help you to do a proper job first time round, nice and neat with no leaks. 4. I also used a self aligning washer to help centralise the tap in the hole, but this isn't vital. Hope this helps. 06 July 2013
Rated 1 out of 5 by Very poor Only had the taps on for a few weeks and already the 'HOT' lettering has come off the hot tap. We are carefull not to use any harsh cleaning products in the bathroom as we have expensive tiles etc, so we are very disappointed to say the least, it would be a big task to replace the taps again as the feed pipes are boxed in !! 14 January 2013
Rated 4 out of 5 by As expected cheap & cheerful but ideal for the little basin in the downstairs loo. A leading competitor sells the same thing but cheaper, but were out of stock. These look fine & do the job 10 January 2013
Rated 4 out of 5 by very happy with goods easy to fit and use and gives a nice classic look 13 November 2012
Rated 4 out of 5 by Good taps Have just had these taps fitted. They are nice, solid looking taps and I would say good value for the price paid. 05 March 2012
Rated 5 out of 5 by Superb - these look great! Super quality and very simple to fit. A great price for the quality and they are simple to turn on and off - even for a small child which is very handy for us! They look great and have made a real difference to the look of the whole bath room - super! Would highly recommend! 05 February 2012
Rated 5 out of 5 by Happy Very happy with Taps.Excellant quality. 01 February 2012
  • 2016-05-02 T05:33:46.008-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_14, tr_14
  • loc_en_US, sid_360126, prod, sort_default