Rated 3.2 out of 5 by 5
Rated 1 out of 5 by gfngfn Drips and drips
Used this product twice and both times failed to stop the drip. Might work on very small drips without any pressure but with a bit of water pressure behind it the drip still comes through.
12 April 2013
Rated 5 out of 5 by Tux Excellent product
Excellent product and easy to use (even to a DIY numpty like me!)
01 February 2012
Rated 4 out of 5 by papajo As expected - more or less
Easy to cut the tubes, and replace the caps. But do be careful - use a cutting board.
Both products are quite 'thick', and it takes a while to work the two together. (So I won't give it five stars).
But it did the job - a weeping solder joint close to the central heating pump. (Alternative would have been to draindown the system, reheat of the joint, refill the system to check if the leak had stopped (!), then put in fresh inhibitor)
19 September 2011
Rated 3 out of 5 by NorthH Atmos Mastic
It did not do the work as per packing description. It hardend but did not stop water leak. It would be ok to use where the surface is completely dry.
13 October 2010