- Features: Suitable for square shank levers
- Dimensions: (H)110, (W)25, (D)20mm
- Colour: Black
- Material: Rubber
- Effects and finish: Matt
- Quantity in pack: 1
- Fitting instructions: Ensure existing lever has a square shank to suit square hole in the lift arm. Holding the lever horizontally fit one of the C-links through the end hole of the lifter and check the c-link falls vertically to the centre line of the siphonpiston rod hole. If the c-link is at an angle then move the c-link along the holes in the lift arm until it falls vertically. Make sure the lver is at least horizontal or biased upwards before connecting the c-link to the siphon piston rod. Connect c-link to piston rod and the lift arm. Make sure the lever pulls the the piston rod fully upwards. If in doubt consult a qualified plumber.